Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement - Underbody >> Installation Procedure

Installation Procedure

  1. Install Fuel Feed Pipe - Underbody (2)
    2. Fig 1: Fuel Feed Pipe - Underbody
    GM4230928Courtesy of GENERAL MOTORS COMPANY
  2. Remove the special tool: EN-6015  plugs.
  3. Connect Fuel Feed Pipe - Underbody (2))@Fuel Feed Pipe - Fuel Pump Module to Underbody (1) Plastic Collar Quick Connect Fitting Service .
    4. Fig 2: Retainer Clips
    GM3707252Courtesy of GENERAL MOTORS COMPANY
  4. Fuel Feed Pipe - Underbody (1) @Retainer Clip (2)
  5. Close Retainer Clip (2)
    6. Fig 3: Bulkhead Clip
    GM3707251Courtesy of GENERAL MOTORS COMPANY
  6. Install Fuel Feed Pipe - Underbody (2)@Bulkhead Clip (1)
  7. Close Bulkhead Clip (1)
  8. Lower the vehicle.
    9. Fig 4: Clip And Bulkhead Clip
    GM4230927Courtesy of GENERAL MOTORS COMPANY
  9. Remove Fuel Feed Pipe - Underbody (1)@Bulkhead Clip (3)
  10. CloseBulkhead Clip (3)
  11. Install Clip (2)
    12. Fig 5: Fuel Feed Front Pipe
    GM4727304Courtesy of GENERAL MOTORS COMPANY
  12. Remove the special tool: EN-6015  plugs.
  13. Connect Fuel Feed Front Pipe(2)@Fuel Feed Pipe(1) Metal Collar Quick Connect Fitting Service 
  14. Connect the negative battery cable. Battery Negative Cable Disconnection and Connection
scientia non olet · About Mike's Workshop Manuals