Installation Procedure
- Install Generator (5)
- Install the wiring harness (4) along with the bracket.
- Install Generator Nut (3) and tighten 22 N.m (16 lb ft)
- Install Generator Bolt (6) and tighten 22 N.m (16 lb ft)
- Install the generator and starter cable generator lead nut (1) and tighten to 12.5 N.m (111 lb in).
- Connect Electrical Connector (2)
- Install Generator and Air Conditioning Compressor Belt Replacement
- Lower the vehicle.
- Connect Battery Negative Cable Disconnection and Connection
CAUTION: