Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Camaro SS, 2D Convertible, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L (LT1 LT4) - Repair Instructions >> Repair Instructions >> Fuel Tank Fuel Pump Module Replacement (Single Transfer Pipe) >> Removal Procedure

Removal Procedure

    WARNING:

    Refer to Gasoline/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Remove Fuel Tank. Refer to Fuel Tank Replacement  » Remove
  2. Remove Fuel Tank Vent Valve Hose @ Fuel Tank Fuel Pump Module. Refer to Fuel Tank Vent Valve Hose Replacement (Fuel Tank Fuel Pump Module) 
  3. Remove Fuel Pump Fuel Feed Hose. Refer to Fuel Pump Fuel Feed Hose Replacement 
  4. Disconnect the electrical connector.
    5. Fig 1: Lock Ring
    GM4179557Courtesy of GENERAL MOTORS COMPANY
  5. Use the CH 45722  wrench by turning counter clockwise and remove the lock ring (1).
    6. Fig 2: Transfer Hose And Fuel Tank Vent Hose
    GM4179561Courtesy of GENERAL MOTORS COMPANY
  6. Disconnect Transfer Hose (1). Refer to Plastic Collar Quick Connect Fitting Service 
  7. Disconnect Fuel Tank Vent Hose (2). Refer to Plastic Collar Quick Connect Fitting Service 
    8. Fig 3: Fuel Tank Fuel Pump Module And Seal
    GM4179562Courtesy of GENERAL MOTORS COMPANY
  8. Remove Fuel Tank Fuel Pump Module (1)
  9. Remove and DISCARD Fuel Pump Seal (2)
scientia non olet · About Mike's Workshop Manuals