Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2017 >> Bolt EV Premier >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> DTC C0131: Traction Control System Pressure Circuit >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Apply the brake pedal.
  3. Verify the function:The stop lamps, also known as brake lamps, are activated when the driver applies the vehicle's brakes.
    • If the function is executed as expected 
  4. Verify DTC C0131 is not set.
    • If DTC C0131 is set 
    1. Calibrate the brake pressure modulator valve pressure sensor.
    2. Verify the DTC does not set.
      • If the DTC sets - Replace the component:K17 Electronic Brake Control Module & Q5 Brake Pressure Modulator
      • If the DTC is not set
    3. All OK.
    • If the DTC is not set 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals