Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Volt LT >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.5L (L3A) - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Cooler Temperature Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

WARNING:

Refer to Exhaust Service Warning

  1. Disconnect Battery Negative Cable. Refer to Battery Negative Cable Disconnection and Connection
  2. Remove Intake Manifold Cover. Refer to Intake Manifold Cover Replacement
  3. Remove Three-Way Catalytic Converter. Refer to Three-Way Catalytic Converter Replacement
    4. Fig 1: EGR Cooler Temperature Sensor, EGR Cooler, Wiring Harness Clip And Electrical Connector
    GM4091553Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the electrical connector (1).
  5. Unclip Exhaust Gas Recirculation Cooler Temperature Sensor (2) @ Wiring Harness Clip (4) (Qty: 2)
  6. Remove Exhaust Gas Recirculation Cooler Temperature Sensor (2) @ Exhaust Gas Recirculation Cooler (3)
scientia non olet · About Mike's Workshop Manuals