Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LV7) - Repair Instructions >> Repair Instructions >> Engine Oil Pressure Sensor Replacement (LV7) >> Removal Procedure

Removal Procedure

  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Reposition the radiator surge tank. Refer to Radiator Surge Tank Replacement .
  3. Remove the engine control module. Refer to the Engine Control Module Replacement .
    4. Fig 1: Front Heater Outlet Hose
    GM4281797Courtesy of GENERAL MOTORS COMPANY
  4. Remove the front heater outlet hose (1). Refer to Heater Outlet Hose Replacement .
  5. Remove the heater inlet hose assembly (2). Refer to Heater Inlet Hose Replacement .
    6. Fig 2: Transmission Mount Bracket Bolt
    GM4230553Courtesy of GENERAL MOTORS COMPANY
  6. Remove the transmission mount bracket bolt (1) and transmission mount bracket (2).
    7. Fig 3: Engine Oil Pressure Sensor Connector
    GM4230554Courtesy of GENERAL MOTORS COMPANY
  7. Disconnect the engine oil pressure sensor connector (1).
  8. Remove the engine oil pressure sensor (2).
scientia non olet · About Mike's Workshop Manuals