Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Spark LS, Automatic CVT Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 25 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Spark. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery.
    Fig 1: Negative Battery Cable And Cable Nut
    GM2753206Courtesy of GENERAL MOTORS COMPANY
  2. Install the battery holder and tighten the retaining nut to 6 N.m (53 lb in).
    CAUTION: Refer to Fastener Caution .
  3. Connect the battery cable.
scientia non olet · About Mike's Workshop Manuals