Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Silverado 1500 SSV, 4WD, Part Time T/Case Control, Gas >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Hybrid/EV Control System) >> Repair Instructions >> Generator Control Module 3-Phase Cable Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
    Fig 1: Generator Control Module 3 Phase Cable
    GM4371986Courtesy of GENERAL MOTORS COMPANY
  1. Generator Control Module 3 Phase Cable - Install
  2. Loosely install the generator control module 3 phase cable mounting bolts.
    3. Fig 2: Generator Control Module 3 Phase Cable Terminal Bolts
    GM4371987Courtesy of GENERAL MOTORS COMPANY
  3. Loosely install the generator control module 3 phase cable terminal bolts.
    4. Fig 3: Generator Control Module 3 Phase Cable Mounting Bolt
    GM4371993Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution

  4. Generator Control Module 3 Phase Cable Mounting Bolt - Tighten 9 (80 lb in)
    5. Fig 4: Control Module 3 Phase Cable Bolt Tightening Sequence
    GM4371999Courtesy of GENERAL MOTORS COMPANY
  5. Tighten the bolts in the sequence shown.8 (71 lb in)
    6. Fig 5: Terminal Cover Seal
    GM4372008Courtesy of GENERAL MOTORS COMPANY
  6. Terminal Cover Seal (2) - Install
  7. Dust Cover - Install
    8. Fig 6: Cover
    GM4372027Courtesy of GENERAL MOTORS COMPANY
  8. Cover (1) - Install
  9. Loosely install the cover bolts.
    10. Fig 7: Terminal Cover Seal
    GM4372033Courtesy of GENERAL MOTORS COMPANY
  10. Heat Shield - Install
  11. Loosely install the heat shield bolts.
    12. Fig 8: Cover Bolt TIghtening Sequence
    GM4372040Courtesy of GENERAL MOTORS COMPANY
  12. Tighten the bolts in the sequence shown.9 (80 lb in)
    13. Fig 9: Starter Generator
    GM4353331Courtesy of GENERAL MOTORS COMPANY
  13. Starter Generator - Install - Starter Generator Replacement 
scientia non olet · About Mike's Workshop Manuals