Rear Compartment Lid Hinge Spring Replacement
| Callout | Component Name |
|---|---|
|
WARNING:
When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
WARNING:
Refer to Eye Protection Warning
. Preliminary Procedure Remove the right or left rear compartment side trim panel as required. Refer to Rear Compartment Side Trim Panel Replacement
. |
|
| 1 | Rear Compartment Lid Hinge Spring Procedure Pull the rear compartment lid spring backwards and unhook the rear compartment lid spring from the rear compartment lid hinge spring bracket.
NOTE:
The springs can be placed in two different positions adjusting the tension for a quicker or slower opening speed.
|