Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Express 2500 Base, Van Cargo Extended, 6.6L Eng VIN L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions >> Repair Instructions >> Nitrogen Oxides Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Fig 1: Nitrogen Oxide Sensor - Position 2
    GM2374136Courtesy of GENERAL MOTORS COMPANY

    Remove the nitrogen oxide sensor (1) from the exhaust.
  3. Remove the nitrogen oxide sensor fasteners (2) then remove the sensor (3).
scientia non olet · About Mike's Workshop Manuals