Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Express 2500 Base, Van Cargo Extended, 4.8L Eng VIN F >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Cellular System, Entertainment System, And Navigation System) >> Repair Instructions >> Radio Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 GMC Savana 3500, 2015 GMC Savana 2500, 2015 Chevrolet Express 3500, and 2015 Chevrolet Express 2500. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Radio Mounting Bracket To Instrument Panel Carrier Screws
    GM639268Courtesy of GENERAL MOTORS COMPANY
  1. Install the radio mounting bracket. Perform the following steps:
    1. Attach the HVAC harness to the radio mounting bracket with the clip.
      2. CAUTION:

      Refer to Fastener Caution .

    2. Install the screws (2) in order to retain the radio mounting bracket (1) to the instrument panel carrier and tighten to 3 N.m (27 lb in).
    2. Fig 2: Radio To Support Bracket Screws
    GM665518Courtesy of GENERAL MOTORS COMPANY
  2. Connect the electrical/audio and antenna cable connectors to the radio.
  3. Install the radio to the support bracket (1).
  4. Align the radio locator tab into the support bracket locator hole.
  5. Install the radio screws (2) and tighten to 2 N.m (18 lb in).
  6. Install the instrument cluster panel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  7. Calibrate the new radio assembly. Refer to Control Module References .
scientia non olet · About Mike's Workshop Manuals