Installation Procedure

Fuel Feed Pipe - Underbody (2)» Install
Remove the special tool: EN-6015 plugs.

Fig 1: Fuel Feed Pipe - Underbody
Courtesy of GENERAL MOTORS COMPANY
Fuel Feed Pipe - Underbody (2) @ Fuel Feed Pipe - Fuel Pump Module to Underbody (1)» Connect - Plastic Collar Quick Connect Fitting Service .
Fuel Feed Pipe - Underbody (1) @ Retainer Clip (2)» Install [4x]

Fig 2: Retainer Clips
Courtesy of GENERAL MOTORS COMPANY
Retainer Clip (2)» Close [4x]
Fuel Feed Pipe - Underbody (2) @ Bulkhead Clip (1)» Install

Fig 3: Bulkhead Clip
Courtesy of GENERAL MOTORS COMPANY
Bulkhead Clip (1)» Close
Lower the vehicle.
Fuel Feed Pipe - Underbody (1) @ Bulkhead Clip (3)» Remove

Fig 4: Clip And Bulkhead Clip
Courtesy of GENERAL MOTORS COMPANY
Bulkhead Clip (3)» Close
Clip (2)» Install
Remove the special tool: EN-6015 plugs.

Fig 5: Fuel Feed Front Pipe
Courtesy of GENERAL MOTORS COMPANY
Fuel Feed Front Pipe (2) @ Fuel Feed Pipe (1)» Connect - Metal Collar Quick Connect Fitting Service
Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection