Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> Cruze LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 1.4L (LE2) - Repair Instructions >> Repair Instructions >> Fuel Feed Pipe Replacement - Fuel Pump Module to Underbody >> Removal Procedure

Removal Procedure

WARNING: Gasoline/Gasoline Vapors Warning
WARNING: Safety Goggles and Fuel Warning
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection
  2. Relieve the fuel pressure: Fuel Pressure Relief 
  3. Remove the fuel tank. (1) Refer to Fuel Tank Replacement .
    Fig 1: Suitable Jack, Fuel Tank Straps And Bolts
    GM4091478Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the fuel tank fuel feed pipe (4) from the fuel tank fuel pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
    Fig 2: Electrical Connector And Fuel Pressure Sensor Clip
    GM4091454Courtesy of GENERAL MOTORS COMPANY
  5. Close all connections with EN-6015  plugs.
  6. Disconnect the electrical connector. (2)
  7. Unclip the fuel tank fuel feed pipe (4) from the fuel tank bracket (5) and the fuel pressure sensor clip (3).
scientia non olet · About Mike's Workshop Manuals