Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> City Express LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L >> Diagnostic Information And Procedures >> DTC P2096 or P2097 >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON.
  2. Verify no other HO2S or fuel trim DTC is set.
    • Go to next step: If no DTC is set 
  3. Verify DTC P2096 or P2097 is not set.
    • If a DTC is set 

      Refer to Circuit/System Testing.

    • Go to next step: If no DTC is set 
  4. Clear the mixture ratio self-learning value with a scan tool.
  5. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed in the Freeze Frame/Failure Records data.
  6. Verify DTC P2096 or P2097 is not set.
    • If a DTC is set 

      Refer to Circuit/System Testing.

    • Go to next step: If no DTC is set 
  7. All OK.