Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2016 >> City Express LS >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.0L >> Diagnostic Information And Procedures >> DTC P0011: Camshaft Position System Performance >> Circuit/System Verification

Circuit/System Verification

  1. Ignition - On / Vehicle - In Service Mode
  2. Verify the correct engine oil level and pressure. Refer to Oil Pressure Diagnosis and Testing
    • If the oil level and the oil pressure are not correct 

      Repair as necessary

    • Go to next step: If the oil level and the oil pressure are correct 
  3. Verify DTC is not set.
    • Go to next step: If none of the DTCs are set 
  4. Operate the vehicle within the Conditions for Running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.
  5. Verify the DTC does not set.
    • If the DTC sets 

      Refer to: Circuit/System Testing

    • Go to next step: If the DTC is not set 
  6. All OK.
scientia non olet · About Mike's Workshop Manuals