Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2015 >> Spark LS, Standard Trans >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 1.2L >> Diagnostic Information and Procedures >> Engine Compression Test >> Installation Procedure

Installation Procedure

  1. Remove the suitable engine compression test tool to the spark plug hole.
    Fig 1: Ignition Coil Cover
    GM2755435Courtesy of GENERAL MOTORS COMPANY
  2. Install the fuel pump relay.
  3. Install the relay carrier cover.
  4. Install the spark plugs and tighten the spark plug to 20 N.m (14.7 lb ft).
  5. Install the ignition coil cover (2). Refer to Ignition Coil Cover Replacement (LL0)  and Ignition Coil Cover Replacement (LFM) .
  6. Tighten the bolts (1) to 10 N.m (89 lb in).
    CAUTION: Refer to Fastener Caution .
scientia non olet · About Mike's Workshop Manuals