Rear Defogger Switch Malfunction
- Ignition OFF, disconnect the harness connector at the K33 HVAC Control Module. Engine running.
- Test for greater than 7 V between the signal circuit terminal 2 and ground.
- Ignition OFF, disconnect the harness connector at the K9 Body Control Module.
- Test for infinite resistance between the control circuit and ground.
- If less than infinite resistance, repair the short to ground on the circuit.
- Test for less than 2 Ω in the control circuit end to end.
- If 2 Ω or greater, repair the open/high resistance on the circuit.
- If less than 2 Ω, replace the K9 Body Control Module.
- Replace the K33 HVAC Control Module.