Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2015 >> Sonic RS, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the junction block cover (1).
    Fig 1: Junction Block Cover
    GM2508802Courtesy of GENERAL MOTORS COMPANY
  3. Remove the positive battery cable nut (1) from the junction block.
    Fig 2: Positive Battery Cable & Nut
    GM2504689Courtesy of GENERAL MOTORS COMPANY
  4. Remove the positive battery cable (2) from the junction block.
  5. Remove the junction block nut (1).
    Fig 3: Junction Block & Components
    GM2504710Courtesy of GENERAL MOTORS COMPANY
  6. Remove the junction block bolts (2).
  7. Disconnect the wiring harness from the junction block base.
  8. Remove the junction block (3) from the base.
  9. Disconnect the wiring harness from the junction block base.
    Fig 4: Junction Block Base & Nut
    GM2504774Courtesy of GENERAL MOTORS COMPANY
  10. Remove the junction block nut (1) from the block base.
  11. Remove the junction block base (2) from the inner wheelhouse.
scientia non olet · About Mike's Workshop Manuals