Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2015 >> Impala Limited LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Power Outlets) >> Repair Instructions >> Accessory Power Receptacle Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2015 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Route the connector through the retainer. Align the accessory power receptacle retainer to the slot in the opening.
    Fig 1: View Of Receptacle Tabs & Retainer Slots
    GM901555Courtesy of GENERAL MOTORS COMPANY
  2. Install the retainer by pressing into place fully seated.
  3. Connect the electrical connector to the receptacle.
  4. Align the tabs on the receptacle to the slots in the retainer. Install the accessory power receptacle by pressing into place until fully seated.
  5. Install the accessory power receptacle fuse.
scientia non olet · About Mike's Workshop Manuals