Fuel Pressure Sensor Replacement - Fuel Injection Fuel Rail

Fig 1: Fuel Pressure Sensor - Fuel Injection Fuel Rail

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Relieve the fuel system pressure. Refer to Fuel Pressure Relief (Without CH 48027) Fuel Pressure Relief (CH 48027) Fuel Pressure Relief (High Side) . Remove the fuel pipe shield. Refer to Fuel Pipe Shield Replacement .
1	Fuel Injection Fuel Rail Fuel Pressure Sensor CAUTION: Refer to Fastener Caution . Procedure Disconnect the electrical connector. Tighten 33 N.m (25 lb ft)

Callout

Component Name

Preliminary Procedure

Fuel Injection Fuel Rail Fuel Pressure Sensor

CAUTION:

Procedure
Disconnect the electrical connector.
Tighten
33 N.m (25 lb ft)