Installation Procedure

Install the battery (1) into position on the battery tray.

Fig 1: Battery
Courtesy of GENERAL MOTORS COMPANY
Install the battery retainer (2) and tighten the fastener (1) to 10 N.m (88 lb in).

Fig 2: Battery Retainer And Fastener
Courtesy of GENERAL MOTORS COMPANY

CAUTION: Refer to Fastener Caution .
Install the battery fuse block (2) to the battery with the retainers (1).

Fig 3: Battery Fuse Block And Retainers
Courtesy of GENERAL MOTORS COMPANY
Install the battery positive cable (2) to the battery fuse block and tighten the fastener (1) to 12 N.m (106 lb in).

Fig 4: Battery Hold-Down Strap And Battery Fuse Block Cable Clamp Fastener
Courtesy of GENERAL MOTORS COMPANY
Install the battery hold-down strap (4) to the battery positive post.
Install the battery positive clamp to the post and tighten the fastener (3) to 4.5 N.m (44 lb in).
Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
Close the cover (2) on the battery fuse block.

Fig 5: Battery Fuse Block Cover
Courtesy of GENERAL MOTORS COMPANY
Install the battery cover (2) with the retaining tabs (1).

Fig 6: Battery Cover And Retaining Tabs
Courtesy of GENERAL MOTORS COMPANY
Perform the battery sensor module learn program. Refer to Battery Sensor Module Learn