Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2015 >> Express 2500 Base, Van Cargo Extended, 6.6L Eng VIN L >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.6L (LGH) - Repair Instructions >> Repair Instructions >> Glow Plug Replacement >> Glow Plug Replacement - Bank 2 >> Installation Procedure

Installation Procedure

    Fig 1: View Of Left Glow Plugs
    GM1335554Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

  1. Install the glow plug(s) and tighten to 18 N.m (13 lb ft).
  2. Install the harness to the glow plug(s).
  3. Install the glow plug harness nut(s) and tighten to 1.7 N.m (15 lb in).
  4. Install the right front wheel and tire. Refer to Tire and Wheel Removal and Installation .
  5. Install the wheelhouse splash shield. Refer to Wheelhouse Splash Shield Replacement .
  6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  7. Install the engine cover. Refer to Engine Cover Replacement .
scientia non olet · About Mike's Workshop Manuals