Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Nitrogen Oxides Sensor Replacement - Position 1 >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Disconnect the nitrogen oxide sensor module wiring harness plug (4) from the nitrogen oxide sensor module (2).
    Fig 1: Nitrogen Oxide Sensor Module And Bolts
    GM3216285Courtesy of GENERAL MOTORS COMPANY
  3. Remove the 2 nitrogen oxide sensor module bolts (1).
  4. Remove the nitrogen oxide sensor module (2) from the air cleaner lower housing (3).
  5. Loose the nitrogen oxide sensor (1), use a suitable tool, e.g. a crow foot.
    Fig 2: Nitrogen Oxide Sensor
    GM3216284Courtesy of GENERAL MOTORS COMPANY
  6. Remove the nitrogen oxide sensor (1).
scientia non olet · About Mike's Workshop Manuals