Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2015 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Emission Reduction Fluid Pump Module Wiring Harness Replacement >> Removal Procedure

Removal Procedure

  1. Before performing the first steps, review the Emission Reduction Fluid and Emission Reduction Fluid Handling .
  2. Remove the emission reduction fluid tank insulator - upper. Refer to Emission Reduction Fluid Tank Insulator Replacement - Upper .
  3. Disconnect the 6 emission reduction fluid pump module wiring harness plugs.
    Fig 1: Emission Reduction Fluid Pump Module Wiring Harness Plug And Body Wiring Harness
    GM3216250Courtesy of GENERAL MOTORS COMPANY
  4. Disconnect the emission reduction fluid pump module wiring harness plug (1) from the body wiring harness.
  5. Cut and DISCARD the 4 cable ties.
  6. Remove the emission reduction fluid pump module wiring harness (2).
scientia non olet · About Mike's Workshop Manuals