Radio Speaker Amplifier Replacement

WARNING: This page is about a different car, the 2013 Chevrolet Trax and 2013 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Radio Speaker Amplifier

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the load floor front trim panel support - right side. Refer to Load Floor Front Trim Panel Support Replacement (Buick) .
1	Radio Speaker Amplifier Fasteners (Qty: 3) CAUTION: Refer to Fastener Caution .
2	Radio Speaker Amplifier Procedure Disconnect the electrical connectors. For programming and set up information, refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the load floor front trim panel support - right side. Refer to Load Floor Front Trim Panel Support Replacement (Buick) .

Radio Speaker Amplifier Fasteners (Qty: 3)

CAUTION:

Refer to Fastener Caution .

Radio Speaker Amplifier

Procedure

Disconnect the electrical connectors.
For programming and set up information, refer to Control Module References .