Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Traverse LTZ, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Cooling System >> Diagnostic Information and Procedures >> Transmission Fluid Cooler Flushing and Flow Test >> Code Recording Procedure

Code Recording Procedure

  1. Turn the main function switch to the CODE position.
    Fig 1: View Of Main Function Switch CODE Position
    GM1212346Courtesy of GENERAL MOTORS COMPANY
  2. Record TESTED flow rate, temperature, cycle and seven-character flow code information on repair order.
    NOTE:
    • If power is interrupted prior to the recording of the seven-character code, the code will be lost and the flow rate test will need to be repeated.
    • The flow test must run for a minimum of 8-10 seconds and be above 0.5 GPM for a code to be generated.
scientia non olet · About Mike's Workshop Manuals