Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Sonic RS, 4D Hatchback, Automatic Trans >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Wiring Systems And Power Management - Repair Instructions >> Repair Instructions >> Front Compartment Fuse Block Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Junction Block Base & Nut
    GM2504774Courtesy of GENERAL MOTORS COMPANY
  1. Position the junction block base (2) to the inner wheelhouse stud.
  2. Install the junction block base nut (1) and tighten to 9 (80 lb in).
    CAUTION: Refer to Fastener Caution .
    3. Fig 2: Junction Block & Components
    GM2504710Courtesy of GENERAL MOTORS COMPANY
  3. Install the junction block to the base.
  4. Install the junction block bolts (2) and tighten to 9 (80 lb in).
  5. Install the junction block nut (1) and tighten to 7 (62 lb in).
    6. Fig 3: Positive Battery Cable And Nut
    GM2504689Courtesy of GENERAL MOTORS COMPANY
  6. Position the positive battery cable to the junction block.
  7. Install the positive battery cable nut (2) and tighten to 5 N.m (44 lb in).
    8. Fig 4: Junction Block Cover
    GM2508802Courtesy of GENERAL MOTORS COMPANY
  8. Install the junction block cover (1).
  9. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About Mike's Workshop Manuals