Exhaust Temperature Sensor Replacement - Position 1

Fig 1: Identifying Exhaust Temperature Sensor - Position 1

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the engine cover. Refer to Engine Cover Replacement .
1	Exhaust Temperature Sensor CAUTION: Refer to Fastener Caution . Procedure Disconnect the electrical connector. If reinstalling the old sensor, coat the threads with anti-sieze compound. Refer to Adhesives, Fluids, Lubricants and Sealers . Tighten 45 N.m (33 lb ft)

Callout

Component Name

Preliminary Procedure
Remove the engine cover. Refer to Engine Cover Replacement .

Exhaust Temperature Sensor

CAUTION:

Procedure

Disconnect the electrical connector.
If reinstalling the old sensor, coat the threads with anti-sieze compound. Refer to Adhesives, Fluids, Lubricants and Sealers .

Tighten
45 N.m (33 lb ft)