Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Exhaust Temperature Sensor Replacement - Position 3 >> Removal Procedure

Removal Procedure

WARNING:

Refer to Exhaust Service Warning .

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
    3. Fig 1: Exhaust Temperature Sensor Wiring Harness Plug And Exhaust Temperature Sensor
    GM3216288Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the exhaust temperature sensor wiring harness plug (1).
  4. Remove the exhaust temperature sensor (3) out of the retainer (2).
  5. Remove the 2 straps.
  6. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  7. Remove the exhaust temperature sensor (1) from the exhaust front pipe thread (4), use a suitable tool.
scientia non olet · About Mike's Workshop Manuals