Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Exhaust Gas Recirculation Valve Temperature Sensor Replacement - Position 2 >> Removal Procedure

Removal Procedure

  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
    3. Fig 1: Exhaust Gas Recirculation Valve Temperature Sensor Wiring Harness Plug
    GM3216281Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the exhaust gas recirculation valve wiring harness plug (5) from the exhaust gas recirculation valve (6) and lay aside.
    4. WARNING:

    In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.

  4. Disconnect the exhaust gas recirculation valve temperature sensor wiring harness plug (4).
  5. Remove the exhaust gas recirculation valve temperature sensor wiring harness plug (4) out of the retainer (3).
  6. Remove the exhaust gas recirculation valve temperature sensor (2), use a suitable tool.
scientia non olet · About Mike's Workshop Manuals