Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Cruze Diesel >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.0L (LUZ) Diesel - Repair Instructions >> Repair Instructions >> Emission Reduction Fluid Supply Pump Module Replacement >> Removal Procedure

Removal Procedure

  1. Before performing the first steps, review the Emission Reduction Fluid and Emission Reduction Fluid Handling .
  2. Remove the emission reduction fluid tank insulator - upper. Refer to Emission Reduction Fluid Tank Insulator Replacement - Upper .
    3. Fig 1: Emission Reduction Fluid Supply Pump Module And Wiring Harness Plugs
    GM3216255Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    The emission reduction fluid system is very sensitive to contamination and component cleanliness is vital.

  3. Disconnect the 3 wiring harness plugs (3, 6) from the emission reduction fluid supply pump module (1).
  4. Disconnect the emission reduction fluid exhaust front pipe injection supply pipe (4) from the emission reduction fluid supply pump module (1). Refer to Plastic Collar Quick Connect Fitting Service .
  5. Remove the 3 emission reduction fluid supply pump module bolts (2).
  6. Remove the emission reduction fluid supply pump module (1) from the emission reduction fluid tank reservoir (5).
  7. Remove and DISCARD the 2 emission reduction fluid supply pump module seal rings (7).
scientia non olet · About Mike's Workshop Manuals