Stop Lamp Switch Replacement

WARNING: This page is about a different car, the 2012 Chevrolet Captiva Sport. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Manufacturer indicates the use of both a stop light switch and a brake pedal position sensor; however, wiring schematic indicates only a pedal position sensor is used. See Stop Lamps under SCHEMATIC WIRING DIAGRAMS.

Fig 1: Stop Lamp Switch

Courtesy of GENERAL MOTORS COMPANY

Stop Lamp Switch Replacement

Callout	Component Name
1	Stop Lamp Switch Assembly Procedure Disconnect the electrical connection. Rotate the stop lamp switch counterclockwise to remove it from the pedal assembly. Refer to Stop Lamp Switch Adjustment