Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Caprice 6.0L Eng VIN 2 >> Repair and Diagnosis >> Brakes >> Traction Control >> Antilock Brake System >> Diagnostic Information and Procedures >> Traction Control/Stability Control Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

  1. Ignition ON, command the IPC Display Test ON and OFF with a scan tool. The stabilitrak indicator should turn ON and OFF when changing between the commanded states.
    • If the stabilitrak indicator does not turn ON and OFF, replace the IPC.
  2. Observe the scan tool Traction Control Switch parameter while pressing the traction control switch. The reading should change between Inactive and Active.
  3. If all functions test normal, there are no DTCs set, and the traction control system is inoperative, replace the EBCM.
scientia non olet · About Mike's Workshop Manuals