Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Camaro Z/28 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls And Fuel - 3.6L - Specifications) >> Specifications >> Fastener Tightening Specifications

Fastener Tightening Specifications

WARNING: This page is about a different variant/trim than selected.
Application Specification
Metric English
Accelerator Pedal Position (APP) Sensor to Body Retaining Bolt 9 N.m 80 lb in
Air Cleaner Lower Housing to Body Retaining Bolt 10 N.m 89 lb in
Air Cleaner Outlet Duct Hose Clamp 4 N.m 35 lb in
Camshaft Position (CMP) Actuator Solenoid Valve to Engine Front Cover Retaining Bolt 9 N.m 80 lb in
Camshaft Position (CMP) Sensor to Engine Front Cover Retaining Bolt 10 N.m 89 lb in
Crankshaft Position (CKP) Sensor to Engine Block Retaining Bolt 10 N.m 89 lb in
Engine Coolant Temperature (ECT) Sensor 20 N.m 15 lb ft
Evaporative Emission (EVAP) Canister Purge Solenoid Valve bolt 10 N.m 89 lb in
Evaporative Emission (EVAP) Canister to Underbody Retaining Bolt 6 N.m 53 lb in
Fuel Feed Intermediate Pipe Fitting 28 N.m 21 lb ft
Fuel Feed Pipe Bolt 50 N.m 37 lb ft
Fuel Feed Pipe Fitting 28 N.m 21 lb ft
Fuel Pipe Shield 10 N.m 89 lb in
Fuel Pipe Stone Guard to Underbody Retaining Nut 5 N.m 44 lb in
Fuel Pressure Sensor 33 N.m 24 lb ft
Fuel Rail Assembly Bolt
  • First pass
 12 N.m 106 lb in
  • Final pass
 23 N.m 17 lb ft
Fuel Rail to Lower Inlet Manifold Retaining Bolt 10 N.m 89 lb in
Fuel Tank Heat Shield 5.5 N.m 49 lb in
Fuel Tank Hose to Filler Tube Clamp 4 N.m 35 lb in
Fuel Tank Strap to Underbody Retaining Bolt 30 N.m 22 lb ft
Filler Tube Support Bracket to Body Retaining Bolt 9 N.m 80 lb in
Heated Oxygen Sensor (HO2S) 42 N.m 31 lb ft
Ignition Coil to Camshaft Cover Retaining Bolt 10 N.m 89 lb in
Intake Manifold Runner Control Solenoid to Upper Intake Manifold Retaining Bolt 10 N.m 89 lb in
Knock Sensor to Engine Block Retaining Bolt 23 N.m 17 lb ft
Manifold Absolute Pressure Sensor 4 N.m 35 lb in
Mass Airflow Sensor with Intake Air Temperature (MAF) Sensor to Air Cleaner Upper Housing Retaining Screw 4 N.m 35 lb in
Rear Frame to Underbody Retaining Bolt
  • First pass
 65 N.m 48 lb ft
  • Final pass
 +120Degrees
Spark Plug
  • Fit New Spark Plug
 20 N.m 15 lb ft
  • Refit Existing Spark Plug
 18 N.m 13 lb ft
Throttle Body to Upper Intake Manifold Retaining Bolt 10 N.m 89 lb in
scientia non olet · About Mike's Workshop Manuals