Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2014 >> Camaro LS, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement - Bank 2 (Left Side) Intake >> Removal Procedure

Removal Procedure

  1. Ignition OFF.
  2. Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement - Front .
    3. Fig 1: Identifying CMP Sensor & Electrical Connector
    GM1949776Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Refer to Safety Glasses Warning .

  3. Use compressed air to remove debris from the CMP sensor and surrounding cavities.
  4. Remove the camshaft position (CMP) sensor electrical connector (1) from the CMP sensor (2).
    5. Fig 2: Identifying CMP Sensor To Engine Front Cover Retaining Bolt
    GM1949777Courtesy of GENERAL MOTORS COMPANY
  5. Remove the CMP sensor to engine front cover retaining bolt (1).
  6. Remove the CMP sensor (2) from the engine.
scientia non olet · About Mike's Workshop Manuals