Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Volt >> Repair and Diagnosis >> Hybrid/Electric Powertrain >> Electric Converters and Controllers >> Hybrid/EV Control System >> Diagnostic Information and Procedures >> DTC P1E1B-P1E1F >> Circuit/System Verification

Circuit/System Verification

  1. Vehicle ON.
  2. Verify DTC P1E1B, P1E1C, P1E1D, P1E1E, or P1E1F is not set.
    • If any of the DTCs are set 
    1. Program the T6 Power Inverter Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the T6 Power Inverter Module.
      • If the DTC does not set.
    3. All OK
    • If none of the DTCs are set 
  3. All OK