Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 57 (Object Detection System - Park Assist System) >> Repair Instructions >> Front Parking Assist Alarm Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2011 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Parking Assist Alarm Sensor
    GM1699865Courtesy of GENERAL MOTORS CORP.
  1. Remove front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
  2. Disconnect electrical from the front object alarm sensor.
  3. Lift the locking tabs on the housing and remove the front object alarm sensor.
scientia non olet · About Mike's Workshop Manuals