Circuit/System Verification
WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
- Vehicle ON. Operate the hood release to open the hood. The engine should start and run.
- If the engine fails to start, diagnose the engine system. Refer to Engine Cranks But Does Not Run .
- If the engine starts, the problem is intermittent and not present at this time.
- DTC is set, and the engine is running program the T6 power inverter module.
- If the DTC resets, replace the T6 power inverter module.