Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Volt >> Repair and Diagnosis >> External Pages >> Different car >> Section 173 (Power Steering System) >> Diagnostic Information and Procedures >> DTC C047A >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2012 Chevrolet Volt. However, it is still accessible from the selected car via links, so may be relevant.
  1. With a scan tool perform the Power Steering Control Module Calibration procedure Steering Angle Sensor Centering and Software Endstop Learning.
  2. Verify that DTC C047A does not set.
    • If the DTC does set

      Replace the K43 Power Steering Control Module.

    • If the DTC does not set
  3. All OK.
scientia non olet · About Mike's Workshop Manuals