Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Trax LS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Power Seat System) >> Repair Instructions >> Driver or Passenger Seat Adjuster Memory Module Replacement (Encore)

Driver or Passenger Seat Adjuster Memory Module Replacement (Encore)

WARNING: This page is about a different car, the 2016 Chevrolet Trax and 2016 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Driver Or Passenger Seat Adjuster Memory Module (Encore)
GM2869190Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
Preliminary Procedure 
Remove the front seat . Refer to Driver or Passenger Seat Removal and Installation .
1 Driver or Passenger Seat Adjuster Memory Module Fastener (Qty: 4)
CAUTION:

Refer to Fastener Caution .

2 Driver or Passenger Seat Adjuster Memory Module

Procedure

  1. Disconnect the electrical connectors.
  2. Remove the module from the adjuster memory and wiring harness bracket.
  3. Refer to Control Module References for programing and setup information.