Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Engine Control System & Fuel System - 2.8L, 3.0L - Repair Instructions) >> Repair Instructions >> Fuel System Cleaning >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.

Assemble the fuel system as follows:

  1. Install the fuel injectors and fuel rail. Refer to Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 1 (LF1)  and Fuel Injection Fuel Rail Assembly Replacement - Bank 2 (LF1) .
  2. Install the fuel module assemblies. Refer to Primary Fuel Tank Module Replacement (NT7, NU5)  or Primary Fuel Tank Module Replacement (NA3, NE9, NF9)  and Secondary Fuel Tank Module Replacement .
  3. If required, install the fuel filter. Refer to Fuel Filter Replacement (China) .
  4. Refer to Metal Collar Quick Connect Fitting Service  in order to connect the following quick connect fittings to the fuel rail:
    • The feed hose/pipe
    • The return hose/pipe
scientia non olet · About Mike's Workshop Manuals