Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Power Seat System) >> Diagnostic Information and Procedures >> DTC B2755 or B2765: Memory Select/Set Switch >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2015 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition ON.
  2. Verify the scan tool Memory Recall Switches parameter changes between Inactive and Memory 1 when pressing the memory 1 switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  3. Verify the scan tool Memory Recall Switches parameter changes between Inactive and Memory 2 when pressing the memory 2 switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  4. Verify the scan tool Memory Recall Switches parameter changes between Inactive and Set when pressing the MEM switch.
    • If the parameter does not change 

      Refer to Circuit/System Testing.

    • If the parameter changes 
  5. All OK.
scientia non olet · About Mike's Workshop Manuals