Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Battery, Charging System And Starting System) >> Diagnostic Information and Procedures >> DTC B1517 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2010 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Engine running, accessories OFF, measure and record the voltage at the battery voltage at the C1 battery terminals. The voltage should be between 12.6 and 15.0 V.
  2. Observe the scan tool BCM Battery Voltage parameter. Verify that the scan tool displays a valve that is within 2 V of the battery terminal voltage.
scientia non olet · About Mike's Workshop Manuals