Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls/Fuel - 3.6L (LLT) - DTC P0010 To DTC P0336 >> Diagnostic Information and Procedures >> DTC P0106 >> Typical Scan Tool Data

Typical Scan Tool Data

MAP Sensor

Circuit Short to Ground Open Short to Voltage
Operating Conditions:  Engine running, transmission in Park or Neutral
Parameter Normal Range:  20-48 kPa (2.9-7 PSI), varies with altitude
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 127 kPa (18.4 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 127 kPa (18.4 PSI)*
Low Reference - 127 kPa (18.4 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.
MAP Sensor, if equipped with Turbocharger

Circuits Short to Ground Open Short to Voltage
Operating Conditions:  Engine running at various operating conditions
Parameter Normal Range:  12-225 kPa (1.7-32.6 PSI) (varies with altitude)
5 V Reference 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)
Signal 0 kPa (0 PSI) 0 kPa (0 PSI) 255 kPa (36.9 PSI)*
Low Reference - 255 kPa (36.9 PSI) -
* Internal ECM or sensor damage may occur if the circuit is shorted to B+.