Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Traverse LS, AWD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC B2976 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the driver door latch.
  2. Test for infinite resistance between the signal terminal 1 and the ground terminal 3 with the switch in the open position
    • If less than infinite resistance 

      Replace the driver door lock.

    • If infinite resistance 
  3. Test for less than 3 Ω between the signal terminal 1 and the ground terminal 3 with the switch in the closed position.
    • If 3 Ω or greater 

      Replace the driver door latch.

    • If less than 3 Ω 
  4. All OK
scientia non olet · About Mike's Workshop Manuals