Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Suburban K2500 >> Repair and Diagnosis >> External Pages >> Different car >> Section 2026 (Hybrid/EV Control System) >> Diagnostic Information and Procedures >> DTC P16F3 (Hybrid/EV Powertrain Control Module 1) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2013 GMC Yukon, 2013 Chevrolet Tahoe, and 2013 Cadillac Escalade. However, it is still accessible from the selected car via links, so may be relevant.
  1. Verify that DTC P1AC6, P0335, or any communication U-code DTC is not set.
  2. If the DTC is set, program the T6 drive motor generator power inverter module. If the DTC resets, replace the T6 drive motor generator power inverter module.
scientia non olet · About Mike's Workshop Manuals