Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Sonic RS, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Object Detection System - Park Assist System) >> Repair Instructions >> Rear Parking Assist Alarm Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2012 Chevrolet Cruze. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Parking Assist Alarm Sensor
    GM1699865Courtesy of GENERAL MOTORS COMPANY
  1. Insert the sensor into the housing.
  2. Connect the electrical connector to the rear object sensor.
  3. Install the rear bumper fascia. Refer to Rear Bumper Fascia Replacement .
scientia non olet · About Mike's Workshop Manuals