Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Chevrolet >> 2013 >> Impala LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 362 (Keyless Entry System & Remote Functions) >> Diagnostic Information and Procedures >> DTC B1008 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform the SPS programming procedure to download calibrations to the RCDLR. Refer to Service Programming System (SPS) .
  2. Operate the vehicle within the Condition for Running the DTC and verify the DTC does not reset.
    • If the DTC resets, replace the RCDLR.
scientia non olet · About Mike's Workshop Manuals