Front Seat Heater Control Module Replacement (Impala)

Fig 1: Identifying Front Heated Seat Control Module & Screws

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front seat. Refer to Front Seat Removal and Installation - Bucket (Impala) . Remove the front seat adjuster. Refer to Front Seat Adjuster Replacement .
1	Front Seat Heater Control Module Screw (Qty: 2) CAUTION: Refer to Fastener Caution . Tighten 2 N.m (18 lb in)
2	Front Seat Heater Control Module TIP: Disconnect the electrical connector. Refer to Control Module References for programming and setup information.

Callout

Component Name

Preliminary Procedure

Front Seat Heater Control Module Screw (Qty: 2)

CAUTION:

Tighten
2 N.m (18 lb in)

Front Seat Heater Control Module
TIP: Disconnect the electrical connector.
Refer to Control Module References for programming and setup information.