Front Seat Heater Control Module Replacement
Courtesy of GENERAL MOTORS COMPANY Front Seat Heater Control Module Replacement
| Callout |
Component Name |
|
Preliminary Procedures
- Remove the front seat. Refer to Front Seat Removal and Installation - Bucket
.
- Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement (with KA1)
.
|
| 1 |
Front Heated Seat Control Module Rivets (Qty: 2) Procedure
- Drill out the head of the rivet to remove the module.
- Install new rivets for installation.
|
| 2 |
Front Heated Seat Control Module Procedure
- Disconnect the electrical connector.
- Check to make sure the heated seats are functioning properly.
|